CTI Products TurboVUi Dispatch Client Software - Manual (Page 14)

TurboVUi Dispatch Software Installation and Configuration Guide
14
I MPORT THE L ICENSE F ILE
While in Edit mode, click the Options menu item, then click Update License to display the following Update
License window:
Install the Software Key CD (CTI # S2-61529) into the CD-ROM drive. (The Software Key CD must have the same
serial number as the USB Hardware Key.) Click the
Import button to copy License Key information to the configuration
file, and then close the Update License window.
M ANAGE D EVICES
While in Edit mode, setup the connections to TurboVUi IP Gateways using the following steps:
1. Click on the File menu, then click Manage Devices to display the following window:
2. Click the button to display the following Add Gateway window:
3. In the Gateway Address field, enter the IP Address for the TurboVUi IP Gateway. If the IP Gateway is
connected to a different IP LAN subnet than this Dispatch client PC, then enter the external IP address of the
firewall protecting that subnet. The TurboVUi IP Gateway uses TCP port 48222.
If the router’s external port number can be 48222, then only the IP address is needed. If the router’s external port
number cannot be 48222, follow the IP address with a colon (‘:’), then the external port number programmed into
the router. For example: 10.120.233.46:48222
See the TurboVUi IP Gateway Installation Guide S2-61534 for additional Port Forwarding details.
4. Enter the Password for the IP Gateway.
5. Click the Test button to determine if the TurboVUi IP Gateway is accessible using the IP Network. “Connection
Successful” will be displayed if the connection succeeded.