Options: specifications – Conveyor Technologies AUTOMATIC User Manual
Page 2
OPTIONS:
SPECIFICATIONS:
• PCB Size:.........................................Min. 2” X 4”
........................................................Max.16” X 18”
• PCB Height:.................................... 37.5” + - 2”
• Edge Clearance:.......100” from edge of PCB
• Air Requirements:...................2 cfm @ 25 PSI
• Power Requirements:....15 amps @ 220VAC
• PCB Max Weight: .....................................10 lb.
• PCB Min. Thickness: .................................010”
• PCB Max. Thickness:................................180”
• Cycle Times:
- Load/Unload...........................................6 sec.
- Screw Drive ..................................2.3 – 3 sec.
• Multiple Screw Guns
• Multiple Bowl Feeders
• Conveying Media:
- Pallet Timing Belt
- Edge Chain
- Edge Roller
• Light Tower with Alarm
• Automatic Width Adjust
• Remote Control Station
• Depth/Presence Pin Check Station
• PC Controls
• Line Networking
• 2D Barcode Reader
• Manual Assembly Station