Conveyor Technologies RT/LT-30I User Manual
Pn: rt/lt 301i, Dedicated turn table smts, Standard specifications
PCB Size
Min: 2.0” x 4.0”
Max: 14.0” x 18.0”
PCB Height
37.5 Inches + 2”
Air Requirement
.2 cfm @ 65 PSI
Power Requirement 110 VAC, 15A
Cycle Time
9 Seconds
STANDARD SPECIFICATIONS:
24
PN: RT/LT 301I
DEDICATED TURN TABLE SMTS
STANDARD FEATURES:
• Pneumatic Rotation Drive
• Edges of Conveyor are Flush with Edges of
Adjacent Machines During Transfer
• Right or Left Turn Only
(Can be Reconfigured in 1 hr. in the Field)
• Totally Enclosed for Safety
• PLC Controls with SMEMA Cables
• Board Edge Clearance = .100” (.060” min)
• Hand Crank Width Adjust = 2.0” - 14.0”
• 1/2” Steel Welded Frame
• Capable of 2 Different Configurations
for Fixed Rail Locations
• Safety Sensors Located at Each
Transfer Position
OPTIONS:
• Light Tower for Indicating Operating Status
• Speed Control
• 32” Line Height
30.000"
4.369"
4.369"
37.500"
30.000"
36.000"
- FMU-72I (1 page)
- MFMU-37I (1 page)
- BMLQ-91I (1 page)
- MBMLQ-55I (1 page)
- FIFO-1.3M-50 (1 page)
- MAG-ALL (1 page)
- MMAG-ALL (1 page)
- BBL-I (1 page)
- BBL-IIB (1 page)
- DS-.6M-1 (2 pages)
- CC-1M-1 (1 page)
- VLC-6-1M-1 (1 page)
- SCANNER MOUNT CONVEYORS (1 page)
- CW-1M-1 (1 page)
- WORKSTATION OPTIONS (3 pages)
- SG-II (1 page)
- SG-63I (1 page)
- LG-48I (1 page)
- LG-72I-2 (1 page)
- WU-2.5M-2 (1 page)
- FIFO-.6M-21 (1 page)
- FIFO-.8M-30/60 (1 page)
- FIFO-1.2M-60 (1 page)
- SHC-(LENGTH)I (1 page)
- TT-30I (1 page)
- FL-24I (1 page)
- BRC-(LENGTH) (1 page)
- TLTC-.6M-0/15 (1 page)
- WB(WIDTH)-(LENGTH)-(OPTIONS) (1 page)
- HWO-7F-2 (1 page)
- WI-36I (1 page)
- WIET-.6M (1 page)
- RVC-1M-3-LT (1 page)
- CW-AOI-1.2M-2/1 (1 page)
- LASER MARKER-1M (4 pages)
- FULLY AUTOMATED (2 pages)
- SEMI AUTOMATED (2 pages)
- MANUAL (2 pages)
- MANUAL (1 page)
- TUBE FEEDER (1 page)
- AUTOMATIC (2 pages)
- LABEL APPLICATOR (4 pages)
- COMPONENT VERIFIER (2 pages)
- TABLE TOP VISION SYSTEM (1 page)