CognitiveTPG B780 - Manual (Page 54)

Chapter 5: Programming commands 42
A776 (B780) Programming Guide A776-PG00001 C 12/09
Description
When the monochrome paper type command (00) is set, this command is recognized and retained but has no effect.
The monochrome paper selection (usually black) controls the output.
When two-color paper is loaded and the two-color paper type command set, this command will designate which of
the two colors will be used for everything not specified as having (an) explicit color parameter(s) such as color logos,
side bars, surround graphics, background watermarks or color raster graphics.
Exception
After a power loss or reset the default value m=0 is reset.
Select slip station
ASCII FS
Hexadecimal 1C
Decimal 28
Selects the slip station for printing or MICR. This command must be disabled via 1F 03 38 00 to
use the 1C 70 / 1C 71 logo command sequences.
Select cut mode and cut paper
ASCII GS V m GS V m n
Hexadecimal 1D 56 m 1D 56 m n
Decimal 29 86 m 29 86 m n
Value of m: Selects the mode as shown in the table.
Value of n: Determines cutting position only if m is 65 or 66.
m Feed and cut mode
0, 48 Full cut (no extra feed). Partial cut on the A776.
1, 49 Partial cut (no extra feed).
65 Feeds paper to cutting position + (n times vertical
motion unit), and cuts the paper.
66 Feeds paper to cutting position + (n times vertical
motion unit), and performs a partial cut.
Range of m: 0, 48; 1, 49; 65, 66 (when used with n)
Range of n: 0 – 255
Default of m, n: 0
Selects a mode for cutting paper and cuts the paper. There are two formats for this command, one requiring one
parameter m, the other requiring two parameters m and n. The format is indicated by the parameter m.
Formulas
n times the vertical motion unit is used to determine the cutting position to which the paper is fed.
Exceptions
If m is out of the specified range, the command is ignored.
Set paper type (ColorPOS ® )
ASCII GS 0x81 m n
Hexadecimal 1D 81 m n
Decimal 29 129 m n
Value of m: 0 = monochrome (black) paper (Kanzaki P-310)
1 = Two-color (red/black) papers (Kanzaki P-310RB)