CognitiveTPG B780 - Manual (Page 110)

Chapter 5: Programming commands 98
A776 (B780) Programming Guide A776-PG00001 C 12/09
Third byte (paper sensor information)
Bit Off/On Hex Decimal Status for USM
0 Off 00 0 Receipt paper adequate
On 01 1 Receipt paper low
(if paper low sensor enabled)
1 Off 00 0 Receipt paper adequate
On 02 2 Receipt paper low
(if paper low sensor enabled)
2 Off 00 0 Receipt paper present.
On 04 4 Receipt paper exhausted.
3 Off 00 0 Receipt paper present.
On 08 8 Receipt paper exhausted.
4 Off 00 0 Not used. Fixed to off.
5 Off 00 0 Slip leading edge sensor: paper present
On 20 32 Slip leading edge sensor: no paper
6 Off 00 0 Slip trailing edge sensor: paper present
On 40 64 Slip trailing edge sensor: no paper
7 Off 00 0 Not used. Fixed to off.
Fourth byte (paper sensor information) -- A776
Bit Off/On Hex Decimal Status for USM
0 Off 00 0 Slip paper selected
On 01 1 Receipt paper selected
1 Off 00 0 Possible to print on slip
On 02 2 Not possible to print on slip because no form has been inserted
2 – – – Undefined
3 – – – Undefined
4 Off 00 0 Not used. Fixed to off.
5 – – – Undefined
6 – – – Undefined
7 Off 00 0 Not used. Fixed to off
Continued . . .