CNB SFM-21VF - Manual (Page 9)

④ Insert the main body into the surface mount
bracket with the molding lines on each part being
aligned and turning clockwise.
⑤ Insert the fixing screw tightly and detach
② Detach the marked part from the rubber
gasket and screw the mounting base to
the pendant mount bracket with fixing
screws.
③ Wire cables to terminal block and connect the
terminal blocks to main unit.
the protection vinyl from dome cover.
Installation using Pendant Mount Bracket
◎ This model should start to be installed under the condition which
peeling the dome cover.
① Screw pendant mount to ceiling with screws.
You can use “Guide Pattern” for the making holes.
④ Insert the main body into the pendant mount bracket with
the molding lines on each part being aligned and turning
clockwise.
terminal blocks to main unit.
14 15