Compass direction setup camera setup, Auto exposure setup, White balance setup – CNB SFM-21VF User Manual
Page 17
◎ Set North to assign compass direction as criteria.
Move camera and press NEAR button to save.
Compass Direction Setup
CAMERA SETUP
◎ GAMMA [CRT1/CRT2/LCD1/LCD2]
- Monitor Gamma Gain setup
◎ DAY/NIGHT
[AUTO(0~20/LOW~HIGH)/COLOR/BW(Burst)]
- From BW with AUTO undergoes an
influence at the time of “Delay Time” set.
“D&N LEVEL” mode controls a Day/Night
level. COLOR mode is Day, BW mode is
Night will be able to control Burst On/Off.
◎ SHARPNESS [0~20]
- Adjust SHARPNESS of the image.
◎ SBLC [OFF/LOW/MIDDLE/HIGH]
- Sets Backlight Compensation to ON/OFF.
◎ DNR
[OFF/LOW/MIDDLE/HIGH]
- Enhances images by deducting noises when gain level of images is too high.
AUTO EXPOSURE Setup
◎ WB MODE [AUTO/MANUAL]
- In Manual mode, Red and Blue level can be set
up manually.
◎ RED ADJUST [1~160]
◎ BLUE ADJUST [1~160]
◎ COLOR GAIN
- Red and Blue level can be set up manually
- R-Y [1~20]
- B-Y [1~20]
WHITE BALANCE SETUP
◎ AUTO EXPOSURE SETUP
- Day/Night, AGC, Shutter, SBLC Setup… etc.
◎ WHITE BALANCE SETUP
- WB, Color Gain setup
◎ AGC
[ON(0~20)/OFF]
- Enhances image brightness in case that luminance level of image signal is too low.
◎ LENS LEVEL
[OFF/NORMAL/HIGH]
- Iris should be fixed and Iris has lower
priority in adjusting AE, in comparison with
others.
◎ FLICKERLESS
[ON/OFF]
- Sets Flickerless function to ON/OFF.
- If Flickerless is set to ON, Shutter Speed
does not become regulation.
◎ SHUTTER
[---/Manual(1/60sec~1/120000sec)]
- Shutter Speed should be set to 1/120 sec for NTSC and 1/100 for PAL.
FLICKERLESS
SHUTTER
ON
Not Active
OFF
Active
NOTE1) Relationship of function setup
If FLICKERLESS mode is turned ON, SHUTTER mode is fixed default value.
30
31