CNB SFM-21VF - Manual (Page 21)

GROUP SETUP
◎ GROUP NO [1~8]
Selects Group number to edit.
If a selected Group number is
not defined, "UNDEFINED" will be
displayed under selected Group
number.
◎ CLEAR GROUP [CANCEL/OK]
Deletes data in current Group
◎ EDIT GROUP Starts editing Group.
EDIT GROUP
◎ ACTION ### [NONE/PRESET/SWING/PATTERN]
NEAR
◎ Set up Action, Dwell time and Option. Note that selected item is displayed in reverse.
Move cursor LEFT/RIGHT to select items and move cursor UP/DOWN to change
each value.
◎ Set up items such as Action, ###, Dwell and OPT.
◎ ACTION ### [NONE/PRESET/SWING/PATTERN]
◎ DWELL [0 sec~4minutes]
- Sets Dwell Time between functions.
◎ OPT
- Option. It should be preset speed when preset is
set in Action. It should be the number of repeat
when Pattern or Swing is selected in Action.
◎ Press NEAR key in “NO” list to start Group setup.
◎ Note that MAX. 20 Functions are allowed in a Group. Move cursor UP/DOWN and
press NEAR key to set up.
◎ After finishing setting up a Action, press NEAR key to one-upper-level menu.
Move cursor UP/DOWN to select Action number and repeat.
◎ After finishing setting up all Actions, press FAR key to exit. Then cursor should be
moved to “SAVE”. Press NEAR key to save data.
38 39