CNB SFM-21VF - Manual (Page 10)

⑤ Insert the fixing screw tightly and detach the
protection vinyl from dome cover.
Installation using Wall Mount Bracket
◎ The variable focus lens model should start to be installed under the
③ Wire cables to terminal block and
connect the terminal blocks to main
unit.
④ Insert the main body into the wall
condition which peeling the dome cover.
① Screw all mount bracket to wall with 3 screws.
You can use “Guide Pattern" for the making holes.
② Detach the marked part from the rubber gasket and
screw the mounting base to the wall mount bracket
with fixing screws.
④ Insert the main body into the wall
mount bracket with the molding lines
on each part being aligned and
turning clockwise.
⑤ Insert the fixing screw tightly and detach the
protection vinyl frome dome cover.
16 17