CNB SFM-21VF - Manual (Page 22)

SYSTEM INITIALIZE
◎ CLEAR ALL DATA
- Deletes all configuration data such as display,
camera, motion setup and so on.
◎ CLR DISPLAY SET
- Initializes Display Configuration.
◎ CLR CAMERA SET
- Initializes Camera Configuration.
◎ CLR MOTION SET
- Initializes Motion Configuration.
◎ CLR EDIT SET
- Deletes Preset Data, Swing Data, Pattern Data and Group Data.
Initial Configuration Table
Display Configuration Camera Configuration
CAMERA ID ON SHARPNESS 10
PTZ INFORMATION AUTO SBLC OFF
ACTION TITLE AUTO DNR LOW
PRESET LABEL AUTO AGC ON
ALARM INPUT AUTO AGC LEVLEL 15
NORTH DIRECTION Pan 0° GAMMA CRT2
Motion Configuration LENS LEVEL 8
MOTION LOCK OFF FLICKERLESS OFF
PWR UP ACTION ON SHUTTER 1/60
AUTO FLIP ON WHITE BALANCE AUTO - Deletes Preset Data, Swing Data, Pattern Data and Group Data.
◎ REBOOT CAMERA
- Reboots Zoom Camera module.
◎ REBOOT SYSTEM
- Reboots Speed Dome Camera.
AUTO FLIP ON WHITE BALANCE AUTO
JOG MAX SPEED 120°/sec WB- RED MANUAL – 63
JOG DIRECTION INVERSE WB- BLUE MANUAL – 96
FRZ IN PRESET OFF COLOR GAIN(R-Y) 15
PARK ACTION OFF COLOR GAIN(B-Y) 15
ALARM ACTION OFF User Edit Data
DAY/NIGHT AUTO PRESET 1~128 UNDEFINED
DELAY TIME 3 SWING 1~8 UNDEFINED
D/N LEVEL MIDDLE PATTERN 1~4 UNDEFINED
BURST ON GROUP 1~8 UNDEFINED
40 41