Preset setup, Edit preset scene, Edit preset label – CNB SFM-21VF User Manual
Page 19
PRESET SETUP
◎ PRESET NO
[1~128]
- If a selected preset is already defined, camera
moves to pre-defined position and preset
characteristics such as Label and Relay Outputs
show on monitor. If a selected preset is not defined,
“UNDEFINED” shows on monitor.
◎ CLR PRESET
[CANCEL/OK]
- Delete current Preset data.
◎ EDIT SCENE
- Redefine current Preset scene position (i.e. PTZ).
◎ EDIT LABEL
EDIT PRESET SCENE
① Using Joystick, move camera to desired
position.
② By pressing NEAR key, save current PTZ
data.
③ Press FAR key to cancel.
EDIT PRESET LABEL
① Edits label to show on monitor when camera
◎ EDIT LABEL
- Edits Label to show on monitor when preset runs. MAX. 10 alphabets are allowed.
◎ CAM ADJUST
[GLOBAL/LOCAL]
- WB(White Balance) and AE(Auto Exposure) can be set up independently for each
preset. There are 2 modes, "Global" mode & "Local" mode. The Global mode means
that WB or AE can be set up totally and simultaneously for all presets in "CAMERA
SETUP" menu.
The Local mode means that WB or AE can be set up independently or separately for
each preset in each preset setup menu. Each Local WB/AE value should activate
correspondingly when camera arrives at each preset location. During jog operation,
Global WB/AE value should be applied.
All Local WB/AE value should not change although Global WB/AE value changes. If
“Local’’ is selected, Menu to set WB/AE shows on monitor.
① Edits label to show on monitor when camera
arrives at presets. In Edit Label menu, a reverse
rectangular is cursor. As soon as finishing
selecting alphabet, cursor moves to the next
digit.
② Using LEFT/RIGHT/UP/DOWN of joystick, move
to an appropriate character from the Character
set. To choose that character, press the NEAR
key. If you want to use blank, choose Space
character (" "). If you want to delete a character
before, use back space character (" ←").
③ If you complete the Label editing, move cursor to
"OK" and press NEAR key to save completed
label. To abort current change, move cursor to
"Cancel" and press NEAR key.
34
35