CNB SFM-21VF - Manual (Page 5)

Camera Specifications
◎ CCD Sensor : 1/3" Interline Transfer CCD (Variable Focus Lens Model).
◎ Magnification : Variable focus lens model (3.8mm~9.5mm), size 42x42 mm
◎ Day & Night Function.
◎ Independent & Simultaneous Camera Characteristic Setup in Preset operation.
Powerful Pan/Tilt Functions
◎ Max. 360°/sec high speed Pan/Tilt Motion.
◎ Using Vector Drive Technology, Pan/Tilt motions are accomplished in a shortest
path. As a result, time to target view is reduced dramatically and the video on the
monitor is very natural to watch.
◎ For jog operation using a controller, since ultra slow speed 0.05°/sec can be
PTZ(Pan/Tilt/Zoom) Control
◎ With RS-485 communication, max. 255 of cameras can be controlled at the
same time.
◎ Pelco-D, Pelco-P, Panasonic Old/New, Bosch or Sams E/T protocol can be
selected as a control protocol in the current version of firmware.
OSD(On Screen Display) Menu
◎ OSD menu is provided to display the status of camera and to configure the
functions interactively.
◎ The information such as Camera ID, Pan/Tilt Angle, Alarm Input and Preset
can be displayed on screen.
Features
◎ For jog operation using a controller, since ultra slow speed 0.05°/sec can be
reached, it is very easy to locate camera to desired target view. Additionally it is
easy to move camera to a desired position with pan/tilt movement.
Preset, Pattern, Swing, Group Functions
◎ Max. 127 Presets are assignable and characteristics of each preset can be set up
independently, such as White Balance, Auto Exposure, Label and so on.
◎ Max. 8 set of Swing action can be stored. This enables to move camera repetitively
between two preset positions with designated speed.
◎ Max. 4 of Patterns can be recorded and played back. This enables to move camera
to follow any trajectory operated by joystick as closely as possible.
◎ Max. 8 set of Group action can be stored. This enables to move camera repetitively
with combination of Preset or Pattern or Swing. A Group is composed of max. 20
entities of Preset/Pattern/Swings.
Alarm I/O Functions
◎ 4 alarm sensor Inputs are available.
◎ To reject external electric noise and shock perfectly, alarm sensor Input is
decoupled with photo coupler.
◎ The signal range of sensor input is from DC 5.0 to 12.0 volts to adopt various
applications.
◎ If an external sensor is activated, camera can be set to move to the
corresponding Preset position.
6 7