CNB SFM-21VF - Manual (Page 6)

Basic Components
Product & Accessories (SFM-20VF(N), SFM21VF(P))
Parts Name & Function
Main Unit / Surface Mount Bracket Back of Main Unit
◎ Dome Cover (Bubble)
- Do not detach protection vinyl from the bubble before finishing all installation process
Options
● Pendant ● Wall
- Do not detach protection vinyl from the bubble before finishing all installation process
to protect the bubble from scratches or dust. Selectable clear or smoke types.
◎ Surface
- This is used to install the camera directly on the ceiling. After separating this cover first
and then attach this directly to ceiling. Camera must be assembled at the last stage.
◎ Fixing Screw
- Fixes main unit to surface mount bracket.
◎ Cabling Terminal Block
- During installation, Power, Video, Communication, Alarm Input cables are connected
on to this cabling terminal block.
◎ DIP Switch
- Adjusts camera ID and protocols.
◎ Focus Handle
- Adjusting the focus lens (FAR/NEAR).
◎ Zoom Handle
- Adjusting the zoom lens (TELE/WIDE).
◎ Service Monitor Connector
- User service monitor connector to set camera angle and focus when installing.
8 9