beautypg.com

Osd display of main screen, General rules of key operation for menu main menu, Display setup – CNB SFM-21VF User Manual

Page 16

background image

OSD Display of Main Screen

Alarm Information
P/T/Z Information

LABEL12345

CAM 1

IRIS 12
CAM 1

15/4/x1/N

I : 1 - - -

PRESET

Action Title

Preset Label

Iris Information

Camera ID

◎ P/T/Z Information Current Pan/Tilt angle in degree, zoom magnification and a

compass direction.

◎ Camera ID

Current Camera ID (Address).

◎ The menu items surrounded with ( ) always has its sub menu.
◎ For all menu level, to go into sub menu, press NEAR key.
◎ To go to up-one-level menu, press FAR key.
◎ To move from items to item in the menu, use joystick in the UP/DOWN or LEFT/RGHT.
◎ To change a value of an item, use UP/DOWN of the joystick in the controller.
◎ Press NEAR key to save values and Press FAR key to cancel values.

◎ SYSTEM INFORMATION

- Displays system information and configuration.

◎ DISPLAY SETUP

- Enable/Disable of OSD display on Main Screen.

General Rules of Key Operation for Menu

MAIN MENU

◎ Camera ID

Current Camera ID (Address).

◎ Action Title

◎ IRIS Information

Followings are possible Action Titles and their meaning.

"SET PRESET ×××"

When Preset ××× is stored.

"PRESET ×××"

When camera reach to Preset ×××.

"PATTERN ×"

When Pattern × is in action.

"SWG×/PRESET ×××"

When Swing × is in action.

"UNDEFINED"

"IRIS 12"

When undefined function is called to run.

When IRIS Open/Close is in action.

◎ Preset Label

The Label stored for specific Preset.

◎ Alarm Input

This information shows current state of Alarm Input. If an Input

point is ON state it will show a number corresponding to each

point. If an Input point is OFF state, '-' will be displayed.

Ex) Point 2 & 3 of inputs are ON, OSD will show as below.

I:-23-

◎ DOME CAMERA SETUP

- Configure various functions of this camera.

◎ SYSTEM INITIALIZE

- Initializes system configuration and sets all data to

factory default configuration.

DISPLAY SETUP

◎ This menu defines Enable/Disable of OSD display

on Main Screen. If an item is set to be AUTO, the item

is displayed only when the value of it is changed.

• CAMERA ID

[ON/OFF]

• PTZ INFORMATION

[ON/OFF/AUTO]

• ACTION TITLE

[ON/OFF/AUTO]

• PRESET LABEL

[ON/OFF/AUTO]

• ALARM INPUT

[ON/OFF/AUTO]

28

29

This manual is related to the following products: