INTELLINET NETWORK IDC-767IR Video Surveillance Software Manual User Manual
Page 9
IP Surveillance system
Quick Start
page-8
Quick Start
Install IP camera(s)
Step 1: Setup the IP camera(s) following by the instruction manual provided by
the manufacturer.
Step 2: Check the network between the IP camera(s) and the system.
Step 3: Add the IP camera(s) to the system following below steps.
A
A
D
D
D
D
I
I
P
P
C
C
A
A
M
M
E
E
R
R
A
A
(
(
S
S
)
)
Step 1: Go to Start > All Programs > IP
Surveillance > Main Console.
Step 2: Type in user name and password
and log on to the system.
Step 3
Step 4
Step 3: In Main Console, go to Config >
Setting to obtain the Setting panel.
Step 4: Go to Camera tab.
If your IP cameras support UPnP. Follow step
5. Otherwise, follow step 8.
Step 5: Click “Search” to search for the IP
cameras that are available at this
point.
Note: Search function just support the IP
cameras with UPnP supported.
Step 6: Select one of the IP cameras that are
available; check the option and enter
the username and password.
Step 7: Click OK to add the camera.
Step 8: Click “Insert” to insert the IP cameras.
Step 5 Step 8
Step 12