INTELLINET NETWORK IDC-767IR Video Surveillance Software Manual - Manual (Page 37)

IP Surveillance system
4. Guard
page-36
4.1.2 Event - General Motion
Detect any movement in the defined detection zone.
Enable Event
Life Cycle
Activated Period
Basic Setting
Enable Event: Check the box to activate.
Life Cycle
Automatically cancel event when event disappears: the alarm/action will be
off once the abnormality is fixed or ends.
Manually cancel event or event continues triggered: The alarm/action will
continue until being canceled from the Main Console (Start>Open Event
Report>Cancel All Events). The user currently not at the seat watching the
screen will be notified by the alarm.
Activated Period: You can set up the system to react during a certain time
period; for example, office hours