1 event – INTELLINET NETWORK IDC-767IR Video Surveillance Software Manual User Manual
Page 36
IP Surveillance system
4. Guard
page-35
4
4
.
.
1
1
E
E
v
v
e
e
n
n
t
t
Insert Event
Step 1
There are three sources of events: Camera (video image), Digital Input (device
connected to you PC) and System (condition of your hardware). You can assign
multiple events by following the instructions below.
4.1.1 Assign a Camera Event
.
Step 1: Select a channel from the camera list and click the insert event icon.
Step 2
Step 3
Step 2: Select the event you want on the Event Type list (for bundle version, only
General Motion event is available), and then click OK.
Step 3: Configure the setting of the Event Type. See the following instructions.
This manual is related to the following products: