4 on screen menu – INTELLINET NETWORK IDC-767IR Video Surveillance Software Manual User Manual
Page 19
IP Surveillance system
1. Main Console
page-18
1
1
.
.
4
4
O
O
n
n
S
S
c
c
r
r
e
e
e
e
n
n
M
M
e
e
n
n
u
u
Right click on the camera screen and get the On Screen
Menu, from which you can enable move, enable digital
PTZ, and connect/ disconnect the camera.
1.4.1 Enable Move: With cameras that support PT
function, by selecting the enable move function, you may
adjust the camera’s view by clicking on the display screen.
To cancel this function, right click on the screen and select
Disable Move.
Note: You can only work on current camera after clicking
Enable Move.
1.4.2 Enable Talk: With cameras that support two-way
audio, you may select enable talk to utilize the function.
1.4.3 Connect/ Disconnect: Right click on the display screen and select
Connect/ Disconnect to modify the connecting status of the camera.
1.4.4 Show Camera: Select the camera to be displayed from the Show Camera
Menu.
1.4.5 Delete Camera: Click on Delete Camera to remove a camera from the
display screen. This does not delete the camera from the setting list.
1.4.6 Enable Digital PTZ: To enable the PTZ functions of the camera, select the
Enable digital PTZ option. When enable digital PTZ, we can use mouse wheel to
zoom in and zoom out on the camera.
Note: Enable Digital PTZ is the option function in IP+ software not in IP software
1.4.7 Snapshot: Select the snapshot function to capture a specific video image
immediately. You have the options to copy the image to the clipboard or to save
it.
1.4.8 Manual Record: Start recording video by selecting manual record.
1.4.9 Toggle Full Screen: To view a specific channel with full screen.