INTELLINET NETWORK IDC-767IR Video Surveillance Software Manual User Manual
Page 38
IP Surveillance system
4. Guard
page-37
Event - General Motion
Sensitivity
Interval
Region Definition
Start Simulation
Advanced setting
Sensitivity: Click and move the slider control to the right to increase sensitivity
so that a relatively small movement will trigger the alarm. Move the bar to the left
to reduce the sensitivity of movement detection. Set up an appropriate
Sensitivity value will reduce the chance of false alarm. For example, you can
lower the Sensitivity to avoid the alarm being triggered by a swinging tree in the
breeze.
Interval: Click and move the slider control to the right to increase interval time
so that the alarm will only be triggered when the movement lasts longer. Move to
the left to reduce the interval time.
Region Definition: To detect General Motion, you have to define a detection
zone. Left-click and drag the mouse to draw a detection zone. You may define
more than one zone on the screen by repeating the same process. User can also
click on “All” button to select the entire detection zone.
Start Simulation: Click the Start Simulation button and test the function on the
preview screen.