Configuration, General configuration, Connection – Clear-Com VOICE2 User Manual
Page 82: Options, Configuration -8, General configuration -8, Connection -8, Options: -8, General configuration dialogue -8
Vitec Group Communications
VoICE IP Interface User Manual
5 - 8
CONFIGURATION
GENERAL CONFIGURATION
The general configuration dialogue is accessed via the sequence:
Menu->Option->General/Network
Figure 5-10: General Configuration Dialogue
Connection
Server: The server that SOFT-VoICE connects to. To specify a port
other than the default, use the following format: xxx.xxx.xxx.xxx:port
eg: 172.16.86.100:5000. DNS addressing is supported.
Port: The port on the VoICE server to connect to.
Connect at startup: SOFT-VoICE can connect automatically to the
parameter settings configured in this page when the application starts.
Options:
Trace Level: The level of the log message (higher level will increase
the number of log messages in the log files.). The value should be set
to 1 for normal operation. It may be useful when troubleshooting with
technical support to increase the value to a higher number.