Clear-Com VOICE2 - Manual (Page 27)

Vitec Group Communications
VoICE IP Interface User Manual 2 - 7
Figure 2-6: Properties Window
8. Select the entry Internet Protocol TCP/IP. Note that you may have
to scroll down through the list using the scroll-bars on the right.
Figure 2-7: Protocol Select
9. Then Click on the Properties button.
10. You should then see the Internet Protocol TCP/IP Properties
window:
Figure 2-8: TCP/IP Properties
11. At this point it would be a good idea to record any of the settings
that you currently have in the Internet Protocol TCP/IP Settings
including anything that is in the advanced configuration.