Safety symbols -x, Emc and safety, Caution – Clear-Com VOICE2 User Manual
Page 16

Vitec Group Communications
VoICE IP Interface User Manual
x
has been exposed to rain or moisture, does not operate normally,
or has been dropped.
(12) The IP Interface product contains a lithium battery.
CAUTION: Danger of explosion if battery is incorrectly replaced.
If requested to by an authorised support technician then replace
only with the same or equivalent type.
Lithium batteries can overheat or explode if they are shorted.
When you handle the CPU card or a loose battery, DO NOT touch
any external electrical conductors to the battery’s terminals or to
the circuits that the terminals are connected to.
Please familiarize yourself with the safety symbols in Figure 1.
When you see these symbols on a Interface system, they warn
you of the potential danger of electric shock if the system is used
improperly. They also refer you to important operating and
maintenance instructions in the manual.
Figure 1-1: Safety Symbols
EMC AND SAFETY
The IP Interface system meets all relevant CE, FCC, UL, and CSA
specifications set out below:
EN55022: 1998 + A1 + A2 Electromagnetic compatibility:
Information technology equipment - Radio disturbance
characteristics
EN55024: 1998 + A1 + A2 Electromagnetic compatibility:
Information technology equipment - Immunity characteristics
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol alerts you to the presence of uninsulated dangerous
voltage within the product’s enclosure that might be of sufficient
magnitude to constitute a risk of electric shock. Do not open
the product’s case.
This symbol informs you that important operating and main-
tenance instructions are included in the literature accompanying
this product.