Clear-Com VOICE2 - Manual (Page 57)

Vitec Group Communications
VoICE IP Interface User Manual 3 - 1 7
Figure 3-7: Advanced Tab
Note: If the network connection between a client and a server is
lost both units must wait for the other to timeout before
attempting reconnection. If a shorter timeout is configured
on the client then it will appear to fail to reconnect until the
server timeout is reached. Where possible the timeouts
should be made the same so that after losing the network
connection both client and server timeouts will expire
simultaneously.
STATUS TAB
The Status tab is formed from 2 subtabs for the different module
statistics.
1. Voice
2. Data
ADVANCED ITEMS
Item Description
VoIP Port The listening UDP port for all incoming packets.
Disconnect
Timeout Amount in seconds of the time required for a broken
connection to disconnect (see note below).
TOS/DSCP This allows the setting of the TOS field of all outgoing
IP packets.