Clear-Com Eclipse-PiCo - Manual (Page 59)

Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual 6 - 1
SPECIFICATIONS
ECLIPSE PICO TECHNICAL SPECIFICATION
0 dBu is referenced to 0.775 volts RMS
General
Height 44 mm or 1.75 inches (1 RU)
Width 482 mm (19 inches)
Depth 300 mm (12 inches)
Weight 5 kg max.
Power Consumption 60 W Max. per inlet
Number of Panel Compatible Ports 32
Number of Analog Audio Ports
4
Number of Expansion Modules 1
Number of Power Supply Units 2
Maximum Number of Ports Per SystemCan intelligently link 2 Eclipse PiCo
matrices
Matrix Performance
Sample Rate 48 kHz
Resolution 24 bit
Frequency Response @ 48 kHz sampling30 Hz – 22 kHz ± 3 dBu
Crosstalk (adjacent channel)
<–70 dBu
Nominal Level 0 dBu
Matrix headroom 18 dBu
Distortion <0.05 %, @ 0 dBu, 300 Hz to 10 kHz;
<0.1 %, @ 0 dBu, 100 Hz to 20 kHz
Off Noise <–98 dBu relative to +18 dBu,
20 Hz - 22kHz
On Noise <–83 dB relative to +18 dBu, 20 Hz - 22
kHz
Key Response, Intra-System <40 ms for audio route
Linked Systems <60 ms for audio between matrices
Temperature 0 to +40 C, ambient;
-55 to +70 C, storage
Humidity, Maximum 90% non-condensing
Matrix Interfaces
GPI inputs 8 total; opto-isolated
GPI outputs (relays) 8 total; isolated relay contacts
GPI connector 25-pin D-type socket on rear panel
GPO connector 25-pin D-type plug on rear panel
°
° °
6