Connecting to a local area network, Connecting to a local area network -8 – Clear-Com Eclipse-PiCo User Manual

Page 24

Text mode
Original mode

Clear-Com Communication Systems

Eclipse PiCo Matrix Instruction Manual

2 - 8

Note: To transfer data between two linked PiCo matrices using

the high-speed link the Ethernet ports must be connected
with either a cross-over shielded CAT-5 cable or a with a
hub or switch using conventional shielded CAT-5 cable.

CONNECTING TO A LOCAL AREA NETWORK

The RJ-45 socket labeled “LAN” connects a local area network (LAN)
to the Eclipse PiCo matrix through a standard Ethernet connection.

Note: If this port is used a ferrite must be added to the socket end

of each cable. A suitable ferrite is Würth Electronik part:
74271132.

Note: A shielded CAT-5 cable should be used.