Clear-Com Eclipse-PiCo - Manual (Page 54)

Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual
4 - 1 6
.
Table 4-1: Pin Configuration of Base Loop Connector
Note: To transfer data between two linked PiCo matrices using
the high-speed link also requires that the Ethernet ports are
connected with either a cross-over shielded CAT-5 cable or
a with a hub or switch using conventional shielded CAT-5
cable.
WIRING TO A LOCAL AREA NETWORK
The LAN connector has standard Ethernet pin assignments.
Figure 4-13: Pin Assignments for LAN Connector
CABLE END 1 WIRE COLOR CABLE END 2
Pin 1 white/orange Pin 3
Pin 2 orange Pin 6
Pin 3 white/green Pin 1
Pin 4 blue Pin 4
Pin 5 white/blue Pin 5
Pin 6 green Pin 2
Pin 7 white/brown Pin 7
Pin 8 brown Pin 8
8
8 7 6 5 4 3 2 1
LAN1 and LAN2
Ethernet RJ-45 Connectors
PIN FUNCTION
1
2
3
4
5
6
7
8
Transmit data +
Transmit data –
Receive data +
Unused
Unused
Receive data –
Unused
Unused