Clear-Com Eclipse-PiCo - Manual (Page 28)

Clear-Com Communication Systems
Eclipse PiCo Matrix Instruction Manual
3 - 4
Figure 3-6: Output Level Menu
To adjust a port’s incoming audio levels
1. From the Input Level menu, scroll to the PORT number.
When a port number appears onscreen, that port’s label, as set in
ECS, automatically appears next to it.
2. Press and release the setup/enter knob.
3. Rotate the setup/enter knob clockwise to display the available port
digits.
4. When the desired port digit appears in the display, press the
setup/enter knob to select it.
5. Scroll to the LEVEL number.
6. Press and release the setup/enter knob.
7. Rotate the setup/enter knob clockwise to display available decibel
levels.
The audio level changes in real time as the setup/enter knob is
rotated in the same way as adjusting the audio with a
volume-control knob.
8. When the desired decibel level appears in the display, press the
setup/enter knob to select and save it.
The audio level can be set between -60 dB and 18 dB in 1 dB steps.
9. To exit the menu, scroll to and select EXIT, or to adjust another
port’s level repeat steps 1 through 8.
To adjust a port’s outgoing audio levels
1. From the Output Level menu, scroll to the PORT number.
When a port number appears onscreen, that port’s label, as set in
ECS, automatically appears next to it.
2. Press and release the setup/enter knob.
3. Rotate the setup/enter knob clockwise or counterclockwise to
display the available port digits.
4. When the desired port number appears in the display, press and
release the setup/enter knob to select it.
5. Rotate the setup/enter knob clockwise or counterclockwise to scroll
to the LEVEL number.
6. Press and release the setup/enter knob.
7. Rotate the setup/enter knob clockwise or counterclockwise to
display available decibel level values.
OUTPUT LEVEL
PORT { 00 } [ ]
LEVEL { -0 } dB
IDENT TONE:
Enable [ ]
EXIT