Clear-Com V24PDXY - Manual (Page 7)

Clear-Com Communication Systems V-Series AES-3 Option
© Clear-Com Communication Systems 7 PN 810388Z Rev. 2
Step 5
Taking anti-static precautions remove the AES-3 option card from its
packaging.
Slide the screening PCB over the front of the RJ-45 connector ensuring that
the capacitors fitted to the rear of the screening PCB are at the top and press
the top towards the rear of the connector so that it is held on the spring
contacts (Figure 10).
Figure 10: Screening PCB fitted to AES-3 Card
Screening PCB