Clear-Com V24PDXY - Manual (Page 11)

Clear-Com Communication Systems V-Series AES-3 Option
© Clear-Com Communication Systems 11 PN 810388Z Rev. 2
Step 9
When the upgraded unit is connected ensure that the ferrite provided is put on
the AES cable as close as possible to the connector for the BNC or RJ-45
cable that may be used (Figure 14).
Figure 14: Ferrites Fitted to BNC and RJ-45 Cables
When a panel has been fitted with an AES-3 option card the “AES” box shown
in Figure 2 should be marked with a tick using a permanent marker to record
the modification.