Clear-Com V24PDXY - Manual (Page 18)

V-Series AES-3 Option Clear-Com Communication Systems
PN 810388Z Rev. 2 18 © Clear-Com Communication Systems
Step 6
Insert the AES-3 option card into position over the main PCB so that the
connectors line up with the cutouts and the PCB connector on the bottom of
the card lines up with the socket on the main PCB. Ensure that the mounting
holes at the rear of the AES-3 card line up with the spacers fitted to the V-
Series panel main PCB and press the card down so that the PCB connector
pins are in the socket . Press the top of the screening PCB forward so that it is
in contact with the back of the panel (Figure 22).
Figure 22: AES-3 Option card in V-Series Desktop Panel