Clear-Com V24PDXY - Manual (Page 4)

V-Series AES-3 Option Clear-Com Communication Systems
PN 810388Z Rev. 2 4 © Clear-Com Communication Systems
Step 2
The next step is to remove the four countersunk screws and four panhead
screw and washer assemblies holding the lid on. The countersunk screws are
located on the top of the lid, two of the panhead screw and washer assemblies
are located on the rear of the panel and one at each end of the panel (Figure
5). Ensure that all the screws are retained for refitting the lid.
Figure 5: Rack Mount Panel Lid Retaining Screws