Clear-Com V24PDXY - Manual (Page 10)

V-Series AES-3 Option Clear-Com Communication Systems
PN 810388Z Rev. 2 10 © Clear-Com Communication Systems
Step 8
Screw the lid back on the panel making sure that the correct screws are used
(see Figure 5). Refit the four panhead screw and washer assemblies first and
then the four countersunk screws.
Figure 13: Completed Rack Mount Panel Upgrade with AES-3
If the power supply was originally held in the cradle replace it in the cradle and
reattach the power supply cable to the power inlet (see Figure 3).
Remount the panel in the rack or console and reconnect power and I/O
cables.