Hydra-Tech S24M - Manual

MODEL S24M
24” (600mm) Discharge
24” HYDRAULIC SUBMERSIBLE
AXIAL FLOW HIGH VOLUME PUMP
The S24M is designed for pumping high
volumes of water at low to medium heads.
The mixed flow impeller allows this pump to
be used in a wide range of applications
including dam construction and Flood
control.
FEATURES
C0109
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
: www.hydra-tech.com E-Mail : [email protected]
WEIGHT:..................................................... 1619 lbs. (734 kg)
HEIGHT:............................................................ 72”" ( 183 cm)
DIAMETER (@ widest point):............................ 39" (99 cm)
DISCHARGE:.................................24" O.D. Pipe or Flange
SOLIDS HANDLING:........................................... 1" (25 mm)
HOSE PORTS:....................................................1 1/2 " NPT
HYDRAULIC COUPLINGS:............... 1 1/2 " Wing Nut Style
PUMP BODY:......................................................... Cast Iron
IMPELLER:................................................................ Bronze
SHAFT:......................................................... Stainless Steel
SHAFT SEALS:.................................. Carbon/Ceramic (Std)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:............................... Max. 110 GPM (341 LPM)
OPERATING PRESSURE:... Max. Cont. 3500 PSI (238 Bar)
POWER SOURCE:....... Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice
•
High Volume Axial Flow design
•
High Efficiency mixed flow impeller
•
Small Overall Size allows for use in
tight spaces
•
Variable Speed hydraulic drive
•
Oil Lubricated Seals (can run dry)
•
High Efficiency Balanced Vane hydraulic
motor
•
Safe Hydraulic Drive can be used where
electric power is hazardous or
impractical
•
Operates with our HT200 to HT225
power units or other hydraulic power
sources capable of flows of 90 to 110
GPM