Hydra-Tech S3TCDI User Manual
3” hydraulic submersible utility pump, Features, Model s3tc

MODEL S3TC
(Aluminum Body)
MODEL S3TCDI
(Ductile Iron Body)
3” (75 mm) Discharge
3” HYDRAULIC SUBMERSIBLE
UTILITY PUMP
Our S3TC is a very portable and versatile
utility pump designed for pumping jobs such
as construction sites, manhole pumping and
oil skimming. An efficient channel impeller
offers excellent overall performance. This
pump is offered in your choice of aluminum
or ductile iron body.
FEATURES
C0109
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
WEIGHT S3TC:............................................ 28 lbs. (13 kg)
S3TCDI:........................................ 52 lbs. (24 kg)
HEIGHT:..............................................................14" (36 cm)
WIDTH (@ widest point):.............................. 11 3/4" (30 cm)
DISCHARGE:....................................................... 3" NPT(F)
INLET FLANGE:............................................... 3" 125# ASA
SOLIDS HANDLING:........................................... 3/4" (2 cm)
HOSE PORTS:..................................................1/2" NPT (F)
PUMP BODY S3TC:........................................... Aluminum
S3TCDI:...................................... Ductile Iron
IMPELLER:................................................... Stainless Steel
WEAR RING:...................................................... Ductile Iron
WEAR PLATE:............................................................... Steel
SHAFT:..................................................... Plated 4140 Steel
SHAFT SEAL:.................................... Carbon/Ceramic (Std)
ELASTOMERS:................................................ Buna N (Std)
HYDRAULIC OIL:................ 214-320 s.s.u. @ 100°F (64°C)
INPUT FLOW:.................................... Max. 8 GPM (30 LPM)
OPERATING PRESSURE:............ Max. 2500 PSI (170 Bar)
POWER SOURCE:...... Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice
•
Stainless Steel Channel Impeller
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Small overall size for use tight spaces
•
Can be bolted directly into a pipeline
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
Dependable gear type hydraulic motor
•
Operates with our HT11 to HT15 power
units or other hydraulic power sources
capable of flows of 5-8 GPM