Hydra-Tech S3CHL User Manual
3” hydraulic submersible high performance pump, Features, Model s3chl

MODEL S3CHL
3” x 2” (75 mm x 50 mm)
3” HYDRAULIC SUBMERSIBLE
HIGH PERFORMANCE PUMP
The S3CHL is ideal where small size, yet high
performance pumping is required. The 11 3/4 in.
diameter size and intrinsically safe hydraulic drive
allow this pump to be installed in areas previously
considered inaccessible. Applications include portable
firefighting, mine and deepwell de-watering, barge
and ship cargo pumping, tank stripping, irrigation,
piling and dock jetting, and in-line booster pumping.
FEATURES
•
Compact, Powerful pump for High-Head
applications
•
Will Pass Through a 12 in. "Butterworth"
opening or Deepwell Casing
•
Oil Lubricated Seals (can run dry)
•
Variable Speed hydraulic drive
•
Wide Range of performance
•
Can be bolted directly into a pipeline
•
Safe Hydraulic Drive can be used where
electric power is hazardous or impractical
•
High Efficiency piston hydraulic motor
•
Operates with our HT50 to HT100 power
units or other hydraulic power sources with
flows of 15 - 30 GPM
B0109
167 Stock Street, Nesquehoning, PA 18240 Phone: 570-645-3779 Fax: 570-645-4061
Website
WEIGHT:............................................. 88 lbs. (40 kg)
HEIGHT:................................................... 20" (51 cm)
WIDTH(@ widest point):.................... 11 3/4" (30 cm)
DISCHARGE:............................................. 2" NPT(F)
INLET FLANGE:.................................... 3" 125# ASA
HOSE PORTS:................... 3/4" SAE (-12) or NPT(F)
PUMP BODY:........................................... Ductile Iron
IMPELLER:..................................................... Bronze
WEAR RINGS............................................ (2) Bronze
SHAFT:............................................... Stainless Steel
SHAFT SEAL:........................ Carbon / Ceramic (Std)
ELASTOMERS:..................................... Buna N (Std)
HYDRAULIC OIL:........... SAE 10W or 20W Type AW
also:.....Dexron ATF or Biodegradable Oil
INPUT FLOW:.................... Max. 30 GPM (114 LPM)
OPERATING PRESSURE:.. Max 3500 PSI (238 Bar)
POWER SOURCE:
Any Open Center Hydraulic System
SPECIFICATIONS
Specifications are subject to change without notice