Burkert Type 8741 - Manual (Page 7)

7
Basicsafetyinformation
Type 8741
3 Basic safeTy informaTion
These safety instructions do not take the following into account:
• any contingencies or occurrences that may arise during installation,
use and maintenance.
• Location-specific safety regulations, adherence to which, also on the
part of the mounting personnel, is the responsibility of the operator.
danger due to high pressure in the installation/device.
▶ Before working on the installation or device, cut the pressure
and vent and drain the pipes.
risk of injury from electric shocks.
▶ Before working on the installation or device, switch off the
power and ensure that it cannot be reactivated.
▶ Observe the applicable accident protection and safety regula-
tions for electrical equipment!
Burns/fire hazard due to hot surface of the device!
▶ Keep the device away from any highly flammable materials or
media and avoid any contact with bare hands.
danger due to escape of the medium
▶ Observe the applicable accident protection and safety regula-
tions relating to the operating medium used.
various dangerous situations.
To avoid personal injury, take care:
▶ Not to operate the device without the factory installed input
filters.
▶ Only to operate the device in the installation position given on
the calibration plate.
▶ That the operating pressure of the device is not higher than the
maximum calibration pressure (MFM) specified on the calibra-
tion plate or the tightness pressure of the proportional valve
(MFC).
▶ To only use the device for the medium specified as the operat-
ing medium in the calibration protocol.
▶ Only to use agents that are stable with the device materials for
cleaning and decontamination
The compatibility chart can be found on our homepage:
www.burkert.com
in the event of any ambiguity please contact your local sales
office.
▶ Do not make any internal or external modifications to the device
and do not subject it to mechanical loads.
▶ Protect the installation/device from accidental actuation.
▶ Only trained personnel may perform installation and mainte-
nance work.
▶ After an interruption in the electrical and media supply, ensure a
controlled restart of the process.
▶ Observe best industry practice.
English