Burkert Type 8741 - Manual (Page 40)

40
Transport,storage,disposal
Type 8741
14 TransporT, sToraGe,
Disposal
note!
transport damage!
Damage can be caused to insufficiently protected devices in
transport.
• Remove cables, connectors, separate filters and mounting
hardware.
• Clean and vent contaminated devices.
• Close the fluid connections with protective caps to prevent damage
and protect the sealing.
• Pack the device in two suitable zip lock bags.
• Transport the device in an impact-resistant package, protected
from moisture and dirt.
• Avoid storage above or below the recommended storage
temperature.
incorrect storage can cause damage to the device.
• Close fluid connections with protective caps.
• Store the device dry and dust-free in sealed zip lock bags!
• Storage temperature -10 … +70 °C.
environmental damage due to parts contaminated by media.
• Dispose of the device and its packaging in an environmentally
friendly manner!
• Comply with applicable environmental and disposal regulations.
15 reTUrninG The Device
no work or tests will be carried out on the device until a
valid contamination declaration has been received.
The Contamination Declaration can be downloaded from our
homepage or requested from your local Bürkert sales office.
www.buerkert.de Service Service / Maintenance /
Commissioning Contamination Declaration
To return a device already in use, a returns number is
required.
To return a device that has already been used to Bürkert, proceed as
follows:
→
Fill out the Contamination Declaration.
→
Send the declaration to the address indicated on the form: You
will then receive a Returns Number by fax or post from Bürkert.
→
Pack the device as described in section "14".
→
Return the device to Bürkert with the Contamination Declaration,
quoting the returns number.
Address:
Bürkert Fluid Control Systems
Corporate Quality / Complaint Management
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 599
Fax + 49 (0) 7940 - 10 91 490
E-Mail: [email protected]
English