Burkert Type 8741 - Manual (Page 37)

37
Accessories/SpareParts
Type 8741
12 accessories /spare parTs
Caution!
danger of injury and material damage due to unsuitable
parts!
Incorrect accessories and unsuitable replacement parts can cause
injuries and damage to the device and its environment.
▶ Only use original accessories and spare parts from Bürkert.
12.1 electrical accessories
item order code
4-pin plug connector for Type 8741 565876
4-pin plug connector for Type 8741 with
integrated 120-ohm terminal resistor 566066
büS stick set (including power supply) 772426
Micro SIM card On request
EDS file Download from
www.burkert.com
"Bürkert Communicator" software Download from
www.burkert.com
Table 4: Electrical Accessories
Cable assemblies can be made on request.
12.2 fluid accessories
The MFM / MFC is equipped with a threaded process connection plate
according to DIN ISO 228/1.
A threaded fitting, available as an accessory, is used to connect the
device to a pipe:
• The connection to the device side has a DIN ISO 228/1 thread,
• The connection to the pipe side is available in a range of dimensions.
• The fluid connection should be selected with regard to the application.
• Compression or olive-type fittings are suitable for many applications,
however alternative fittings can also be used.
12.2.1 compression fittings
The following compression fittings are available from Bürkert for the
MFM/MFC.
device con-
nection with
thread in
accordance with
din iso 228/1 pipe
diameter material order
code order code
for seal
ring
G 1/4 6 mm
Stainless
steel
901 538 901 575
G 1/4 8 mm 901 540 901 575
G 1/4 1/4" 901 551 901 579
G 1/4 3/8" 901 553 901 579
Table 5: Compression fittings
English