Burkert Type 8791 - Manual (Page 51)

51
ConfiguringAuxiliaryFunctions
8.5.9. OUTPUT (optional) -
configuration of the analog output
The OUTPUT menu item only appears in the selection of auxiliary functions if the positioner has an analog output
(optional) or if no parameters have been read in yet.
The analog output can be used for feedback of the current position or of the set-point value to the control center.
OUTPUT standard signal output: parameter
standard signal output: type
Position
4 – 20 mA
Position
4 – 20 mA
Setpoint
0 – 20 mA
Fig. 48: OUTPUT function
Standard signal output: parameter Position Output of the current position
Set-point value Output of the set-point value
Standard signal output: type 4 – 20 mA Selection of the unit signal
0 – 20 mA
English
Software Tool - Positioner