Burkert Type 8791 - Manual (Page 43)

43
ConfiguringAuxiliaryFunctions
8.3. parameterization of auxiliary functions
Parameterization and transfer of parameters are described in Sections “6.5. Parameterization” and “6.4.
Transferring Parameters”.
noTe!
if changes are made and transferred with the "write all parameters to device" function, it is possible that
parameters in the device will be unintentionally overwritten!
• Read the current device data before you make the changes or
• transfer only the modified parameters by using the selection options "Write directory only" or "Write directory
and subdirectories only".
Modified values can be transferred to the database with the "Apply" or "OK" button. If you exit the function
with the "Cancel" button, the changes are not transferred.
You can save the project with the "File / Save" menu item.
8.4. Overview of possible auxiliary functions
DIR.ACTUATOR Assignment of the aeration state of the actuator chamber to the actual position
SPLITRANGE Signal split range; input signal as a % for which the valve runs through the entire stroke
range.
X.LIMIT Limit the mechanical stroke range
X.TIME Limit the control speed
X.CONTROL Parameterize the positioner
SAFE POSITION Definition of the safety position
SIGNAL ERROR Configuration of signal level fault detection
BINARY INPUT Activation of the binary input
OUTPUT Configuration of the outputs (only with auxiliary board for analog feedback)
English
Software Tool - Positioner