Burkert Type 8791 - Manual (Page 30)

30
Operationandfunction
6.4.2. Write parameters to the device
noTe!
if changes are made and transferred with the "write all parameters to device" function, it is possible that
parameters in the device will be unintentionally overwritten!
• Read the current device data before you make the changes or
• transfer only the modified parameters by using the selection options "Write directory only" or "Write directory
and subdirectories only".
procedure:
→
Connect
→
Write parameters to device
with option to select: Write all parameters to device
Write directory only
Write directory and subdirectories only
If the parameters are transferred using the PACTware "Device / Store to device" menu item or using the PAC-
Tware
icon, all (!) parameters will be written to the device.
More extensive explanations describing operation and how to create a project are available in the PAC-
Tware online help. For start-up and parameterization, refer also to the operating instructions for the rel-
evant device.
6.5. parameterization
A distinction is made in parameterization between offline and online mode.
Offline mode
In Offline mode the project can be created and parameters can be changed and saved without devices con-
nected. Then the data can be saved later to connected devices in Online mode.
Online mode
In Online mode the device to be parameterized must be connected and ready for operation. Selecting the cor-
responding DTM by right clicking and selecting the "Connect" command or with PACTware menu "Device /
Connect" causes Online mode to be prepared.
English
Software Tool - Positioner