Burkert Type 8791 - Manual (Page 40)

40
ParameterizationofBasicFunctions
7.2.4. DIR.CMD -
effective direction of the positioner Set-point Value
You can use this function to adjust the effective direction between the input signal (INPUT) and the nominal
position of the drive.
Factory setting: rise
The effective direction ( DIR.CMD) can only be changed with DIP switches in the positioner.
DIR.CMD
- only readable direction setpoint rise
Fig. 30: DIR.CMD function
Nominal position
Input signal
(
INPUT)
increasing
decreasing
Fig. 31: DIR.CMD graph
English
Software Tool - Positioner