Burkert Type 8791 - Manual (Page 31)

31
Operationandfunction
6.5.1. parameterizing functions
Buttons
Selection of function
in the navigation area
Value entry in the work area
Fig. 22: Parameterizing functions
procedure:
→
Select the function in the navigation area (highlighted in color)
→
Select or enter the values in the work area
→
Modified values can be transferred to the database with the "Apply" or "OK" button. If you exit the function with
the "Cancel" button, the changes are not transferred.
You can save the project with the "File / Save" menu item.
notes on dip switches:
The switching positions of the DIP switches in the positioner take precedence over the communication
software, i.e. settings of the sealing function (
CUTOFF) or correction characteristic (CHARACT) that are
modified through the communication software are only active if the corresponding DIP switch in the posi-
tioner is set to ON. The effective direction (
DIR.CMD) can only be changed with DIP switches.
All setting that are made must still be transferred to the device (see Chapter “6.4. Transferring Parameters”).
English
Software Tool - Positioner