Burkert Type 8791 - Manual (Page 16)

16
Installation
5.2.1. pactware version 3.6 and .net framework 1.1 including
Sp1
Installation of PACTware requires the presence of software platform:
Microsoft .NET Framework 1.1 with Service Pack 1 (SP1)
procedure to follow if “Microsoft .NET Framework 1.1 with Service Pack 1 (SP1)” is not present yet on the target
computer:
→
Download and / or open the Zip file (1000103878), which includes the Microsoft.NET 1.1 framework.
→
Start “Dotnetfx.exe”.
→
Download and / or open the Zip file (1000103880), which includes the Microsoft.NET 1.1 SP1 framework.
→
Start “NDP1.1sp1*.exe”.
procedure pactware Setup:
→
Download and / or open the Zip file (1000103690), which includes the PACTware setup and unzip in a tem-
porary directory.
→
Start “Setup.exe”.
Setup file “PACTware36setup.zip” contains
• the basic setup for PACTware 3.6 with online help in various languages
• the HART communication DTM for PACTware 3.6
• the Generic HART DTM (not required)
After you have selected the installation language, the installation is performed.
At this point the HART communications DTM can also be installed. It is required because communication with
Bürkert devices runs via the HART protocol and the physical layer has an RS232 interface rather than a HART
interface.
Optional components such as the manual are not installed here.
If PACTware 2.4, PACTware 3.0 or PACTware 3.5 are already installed, all passwords can be transferred for
PACTware 3.6 at the end of the installation.
During the installation, a program group is entered in the Windows start menu for the current user and a link to
PACTware 3.6 appears on the desktop.
procedure dtm Setup:
→
Download and / or open the Zip file (1000121980), which includes the “Buerkert DTM Positioner“ setup, and
unzip in a temporary directory.
→
Start “Setup.exe” in the “Buerkert” subdirectory.
After you have selected the installation language, the installation is performed.
English
Software Tool - Positioner