Packaging, transport, Storage, Decommissioning – Burkert Type 8605 User Manual
Page 35: Restarting

35
Packaging, Transport
12.
PACKAGING, TRANSPORT
NOTE!
Transport damages!
Inadequately protected equipment may be damaged during transport.
• During transportation protect the device against wet and dirt in shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage temperature.
13.
STORAGE
NOTE!
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location!
• Storage temperature. -40 °C … +55 °C.
13.1. Decommissioning
Switch off the Control Electronics Type 8605 as follows:
→
Depressurize the system.
→
Switch off the power supply.
→
Remove the Control Electronics.
→
Keep the control electronics in the original packaging or in some other suitable packaging.
13.2. Restarting
Switch on the Control Electronics Type 8605 again as follows:
→
Unpack the Control Electronics and allow it to reach room temperature before switching on again.
→
Then proceed as described in chapter “8. Installation”.
english
Type 8605