Burkert Type 8605 - Manual (Page 20)

20
Configuration
9. CONFIGURATION
WARNING!
Danger may result from improper use!
Improper use can result in personal injury or damage to the device.
• The Control Electronics, Type 8605 may only be operated by qualified personnel.
NOTE!
Carry out the fluidic and electrical installation before starting the configuration.
9.1. Operating modes
The Control Electronics can be operated in two modes:
• Display mode
• Configuration mode
After switching on the operating voltage, the Control Electronics, Type 8605 is in display mode.
3 s
InP
Out
dELY
…
dAtA
End
Configuration mode Display mode
Figure 13: Switching between display and configuration mode
9.2. Basic settings
Switch to the configuration mode to make the basic settings.
→
Hold the Enter key depressed for 3 seconds.
InP, the first menu item of the configuration menu, appears on the display.
→
Press the Enter key to make settings in the menu item InP.
english
Type 8605