Configuration and function, Operating and display elements, Operating unit – Burkert Type 8605 User Manual
Page 12

12
Configuration and Function
7.
CONFIGURATION AND FUNCTION
7.1.
Operating and Display Elements
7.1.1.
Operating unit
The operating unit consists of a LCD and keys. It is used for displays and settings of the Control Electronics, Type
8605.
Unit of the displayed value
(s, Hz, %, mA, V)
LCD
Lower limit
= active
= not active
Setpoint = Setpoint
(of the coil current)
Process value = Actual value
(of the coil current)
Upper limit
Figure 3:
Operating unit
Key assignment:
Key
Display mode
Configuration
mode
Selected and confirmed menu item
Switch over the display
value
PV [mA] process value
PV [%] process value
SP [%] setpoint
TV [%] duty cycle
Scroll up
(selection)
Increment (increase)
numerical values
Scroll down
(selection)
Decrement (decrease)
numerical values
3 sec
Enter configuration mode
Confirm the
selected menu item
Select and deselect the individual menu
items
Switch between
main-menu and
sub-menu items
e. g.: Out-VALV
Confirm set values
english
Type 8605