Burkert Type 6608 - Manual (Page 7)

24
note!
If the tightening torque is too great, the device may
be damaged!
Observe the maximum tightening torque of the screws! •
Attach valve to manifold:
→
Screw in screws at 0.8 Nm.
Tightening torque
0,8 Nm
Attach coil to body.
→
english 25
Danger!
Risk of electric shock if the protective conductor
function is defective!
After installing the coil, check the function of the pro- •
tective conductor (see chapter entitled “ 8.3. Electrical
Installation”).
Dimensional drawing for manifold:
27
18
M3 min. 6 deep
13.5
max. ∅4
NC IN/OUT NO
18
45.5
44
max. ∅4
M3 min. 6 deep
11 M4 min. 6 deep
Flange layout for
manifold mounting
Flange layout for
single mounting
with clamp
english 25
26
Arrangement of the bores:
3-way 2-way
english 27
8.3. electrical installation
Danger!
Risk of injury due to electrical shock!
Before reaching into the device or the equipment, • switch
off the power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety
•
regulations for electrical equipment!
Types of electrical connections:
Rectangular
plug Flying leads Circular plug
Connection above
english 27
Type 6128, 6608