Burkert Type 2036 - Manual (Page 7)

7
General information
Type 2036
The Ex marking is not valid if Non-Ex devices are added.
3.2 special conditions
→
To ensure potential equalization, ground the valve body to the
pipe system using an electrically conductive connection.
Danger!
danger of explosion caused by electrostatic charge.
In the event of a sudden discharge from electrostatically charged
devices or individuals there is a risk of an explosion in the Ex area.
▶ Implement suitable measures to ensure that there are no
electrostatically charges in the Ex area (see also "3.1 Use in Ex
area").
▶ Clean the device surface by gently wiping it with a damp or anti-
static cloth only.
▶ Earth the actuator and valve body.
▶ If a plastic body is used, earth the actuator separately.
Ambient temperature range: 0 °C ≤ Tamb ≤ 60 °C
4 General inforMaTion
4.1 contact address
germany
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. + 49 (0) 7940 - 10 91 111
Fax + 49 (0) 7940 - 10 91 448
Email: [email protected]
international
Contact addresses can be found on the final pages of the printed
operating instructions.
And also on the Internet at: www.burkert.com
4.2 Warranty
The warranty is only valid if the diaphragm valve is used as intended in
accordance with the specified application conditions.
4.3 information on the internet
The operating instructions and data sheets for Types 2036 can be
found on the Internet at:
www.burkert.com
english