Burkert Type 2036 - Manual (Page 5)

5
Basic safety instructions
Type 2036
3 Basic safeTy insTrucTions
These safety instructions do not make allowance for any
• Contingencies and events which may arise during the installation,
operation, and maintenance of the devices.
• Local safety regulations – the operator is responsible for observing
these regulations, also in relation to the installation personnel.
Danger!
risk of injury from high pressure in the equipment/device.
▶ Before working on equipment or device, switch off the pressure
and deaerate/ drain lines.
risk of electric shock.
▶ Before working on equipment or device, switch off the power
supply and secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations
for electrical equipment.
Warning!
risk of injury when opening the actuator.
The actuator contains tensioned springs. If the actuator is opened,
injuries may be caused by the springs jumping out!
▶ The actuator must not be opened.
Caution!
risk of burns.
The surface of the device may become hot during long-term operation.
▶ Do not touch the device with bare hands.
risk of being crushed by moving spindle ends.
▶ Install transparent cap.
Generally hazardous situations.
To prevent injuries:
▶ Ensure that the system cannot be activated unintentionally.
▶ Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶ After an interruption in the electrical or pneumatic supply, ensure
that the process is restarted in a defined or controlled manner.
▶ The device must only be operated when in a perfect condition and
in consideration of the operating instructions.
▶ The general rules of technology must be observed for application
planning and operation of the device.
To prevent material damage:
▶ Supply only media to the media connections that are specified in
chapter "5 Technical Data" as flow media.
▶ Do not place the valve under mechanical stress (e.g. by placing
objects on it or standing on it).
▶ Do not make any external alterations to the valves. Do not apply
paint to body parts or screws.
english